Idex FAST & FLUID Galileo, User Manual

Page: 30 / 82

FAST & FLUID MANAGEMENT
A Unit of Idex Corporation
Galileo
30
12.5. Cleaning and lubrication of the crown gear
Preparation of the machine Cleaning of the crown gear Greasing of the crown gear

Close the door and switch on the
machine

Open completely the basket plates

Open the door and switch off the
machine.

Using a key of 8 mm. remove the
screws of the two protections of the
crown gear.

Remove the old lubricant and the
residual paints using a cloth (See
paragraph 12.3)

Put the grease on the crown gear
using a brush

Turn manually the basket repeating
the greasing on all the crown gear.

Verify that the grease cover the space
among the teeth .

Assemble again the two protections
in their position.
12.6. Lubrication of the central triple gear group.

Preparation of the machine Greasing of the triple gear group

Close the door and switch on the
machine

Open completely the basket plates

Open the door and switch off the
machine

By using an 8 mm key, remove the
screws of the protection of the triple
gear group

Remove the old grease with a cloth

Put the grease on the conical gears
using a brush

Verify that the grease cover the
space among the teeth

Assemble again the two protections
in their position
12.7. Lubrication of the blocking screws wheel.
Preparation of the machine Greasing of the blocking wheel

Close the door and enter
in the machine

Close completely the
basket plates

Open the door and switch
off the machine

Using a key of 8 mm.
remove the screws of the
toothed wheel

Remove the old grease by
using a cloth

Put the grease on the
toothed wheel using a
brush

Verify that the grease cover
the space among the teeth

Assemble again the
protection in its position.