2
Warning
Install, use and maintain this equipment according to Corken’s instructions and all applicable federal, state, local laws
and codes. Periodic inspection and maintenance is essential.
Corken One Year Limited Warranty
Corken, Inc. warrants that its products will be free from defects in material and workmanship for a period of 12 months
following date of purchase from Corken. Corken products which fail within the warranty period due to defects in material
or workmanship will be repaired or replaced at Corken’s option, when returned, freight prepaid to Corken, Inc., 3805
N.W. 36
th
Street, Oklahoma City, Oklahoma 73112.
Parts subject to wear or abuse, such as mechanical seals, blades, piston rings, packing and other parts showing signs
of abuse are not covered by this limited warranty. Also, equipment, parts and accessories not manufactured by Corken
but furnished with Corken products are not covered by this limited warranty and purchaser must look to the original
manufacturer’s warranty, if any. This limited warranty is void if the Corken product has been altered or repaired without
the consent of Corken.
All implied warranties, including any implied warranty of merchantability or fitness for a particular purpose, are expressly
negated to the extent permitted by law and shall in no event extend beyond the expressed warranty period.
Corken disclaims any liability for consequential damages due to breach of any written or implied warranty on Corken
products. Transfer of toxic, dangerous, flammable or explosive substances using Corken products is at the user’s risk.
Such substances should be handled by experienced, trained personnel in compliance with governmental and industrial
safety standards.
Important notes relating to the European Union (EU) Machinery Directive
Pumps delivered without electric motors are not considered as machines in the EU Machinery Directive. These pumps
will be delivered with a Declaration of Incorporation. The fabricator of the machinery must assure and declare full
compliance with this Directive before the machine in which the pump will be incorporated, or of which it is a part, is put
into service.
Contacting the Factory
Before you contact the factory, note the model number and serial number of your pump. The serial number directs us to
a file containing all information on material specifications and test data applying to your specific pump. When ordering
parts, the Corken service manual or Operations, Installation and Maintenance (IOM) manual should be consulted for the
proper part numbers. ALWAYS INCLUDE THE MODEL NUMBER AND SERIAL NUMBER WHEN ORDERING PARTS.
The model and serial numbers are shown on the nameplate of the unit. Record this information for future reference.
Model no. ______________________________________________________________________________________
Serial no. ______________________________________________________________________________________
Date purchased _________________________________________________________________________________
Date installed ___________________________________________________________________________________
Purchased from _________________________________________________________________________________
Installed by _____________________________________________________________________________________
Summary of Contents for Corken Z-Series
Page 31: ......
