background image

 

i-B350L -CC 

– Hardware User Manual | 20. September 2019 

 

Copyright © 2019 IDENTEC SOLUTIONS. All rights reserved. 

8

 

2.  Introduction 

2.1 

General Information 

The ILR i-B350L CC active RFID broadcast tag transmits data over 500 meters in predetermined intervals. The 

credit card holder housing provides mounting possibilities for an ID card and is ideally suited for personnel safety 
applications. 
The i-B350L CC active RFID tag is ideally suited for industrial applications such as tracking, tracing and identification 
of assets and facility wide access and area control. Using advanced UHF radio frequency technology, the i-B350L CC 

tag transmits data up to 500 meters (1600 feet) to portable or fixed readers.  

With ultra-low power consumption and a configurable ping rate, the i-B350L CC tag can operate maintenance-free 

up to eight years.  

In combination with IDENTEC’s i-Mark® RFID tag exciter, the i-B350L CC provides accurate localization for gates, 
zones, and lanes.  
The credit card housing is designed to be worn by personnel via necklace or in a pocket and provides mounting 
possibilities for an ID card. 

2.2 

System Components 

– Tags 

The i-B350 series of tags are a state-of-the-art generation of active RFID tags.  

The tags provide highly accurate, real-time data collection without human intervention in wireless applications such 
as:  

 

identification  

 

tracking and tracing  

 

localization and  

 

Measurements monitoring.  

 
Using advanced UHF radio frequency technology, i-B350L CC tags transmit and receive data at distances of up to 
30 meters (100 feet) from a handheld device or up to 500 meters (1,640 feet) from a fixed reader.  
 

 

i-B350L CC 

 

The i-B350L CC tag includes a card holder for an ID card

 
The i-B350L CC tag operates in the 850 – 928 MHz UHF band. 
 
 

 

 

 

Summary of Contents for i-B350L-CC

















Reviews: