background image

 

i-B350L -CC 

– Hardware User Manual | 20. September 2019 

 

Copyright © 2019 IDENTEC SOLUTIONS. All rights reserved. 

2

 

 
Proprietary Notice 

This document contains confidential information proprietary to IDENTEC SOLUTIONS and may not be used or 
disclosed to other parties in whole or in part without the prior written authorization from IDENTEC SOLUTIONS. 

 

Disclaimer and Limitation of Liability 

IDENTEC SOLUTIONS AG and its affiliates, subsidiaries, officers, directors, employees and agents do not make 
any express or implied warranties or representations with respect to such information including, without limitation, 
warranties as to non-infringement, reliability, suitability for a particular purpose and accuracy. IDENTEC 
SOLUTIONS shall not under any circumstances be liable to any person for any special, incidental, indirect or 
consequential damages, including without limitation, damages resulting from use of or reliance on information 
presented herein, or loss of profits or revenues or costs of replacement goods, even if informed in advance of the 
possibility of such damages. 

 

Trademarks 

“IDENTEC SOLUTIONS”, “Intelligent Long Range”, “ILR” and the stylized “i” are registered trademarks.  
“i-PORT” and “Visibility Delivered.” are trademarks of IDENTEC SOLUTIONS, Inc. and/or IDENTEC SOLUTIONS 
AG. 

 

Copyright Notice 

Copyright © 2019 IDENTEC SOLUTIONS. All rights reserved. 

No part of this document may be reproduced or transmitted in any form by any means, photographic, electronic, 
mechanical or otherwise, or used in any information storage and retrieval system, without the prior written 
permission of IDENTEC SOLUTIONS. 

 

 

Issue 3.0 / September 2019 (MOM) 

 

Subject to alteration without prior notice. 

Copyright © 2019 IDENTEC SOLUTIONS AG 

Printed in Austria

 

 

Summary of Contents for i-B350L-CC

















Reviews: