2 Operation confirmation
Menu
4 Appendix
1 Overview
3-4
Menu item descriptions
z
Control command
This screen is for sending control commands to the WB9Z-CU100.
Here you can execute operations on the WB9Z-CU100 such as barcode reading and turning the indicator LEDs on and off.
(1)
(2)
(3)
(5)
(4)
(5)
(6)
(7)
(7)
(8)
No.
Name
Description
(1) Communication monitor
Displays communication requests and responses.
Blue text: request, Red text: response
(2) ASCII
Sets the communication monitor to the ASCII display mode.
(3) HEX
Sets the communication monitor to the hexadecimal display mode.
(4) Clear
Clears the communication monitor.
(5) Get MAC address
Gets the MAC address.
Sends the "Get MAC address" control command to the communication unit.
(6) Get IP address
Gets the IP address.
Sends the "Get IP address" control command to the communication unit.
(7) Get subnet mask
Gets the subnet mask.
Sends the "Get subnet mask" control command to the communication unit.
(8) Get default gateway
Gets the default gateway.
Sends the "Get default gateway" control command to the communication unit.
(9) Get version
Gets the firmware version.
Sends the "Get version" control command to the communication unit.