Operation confirmation
3 Menu
4 Appendix
1 Overview
2-5
Operation confirmation method
z
For Windows 8, 8.1, 10
(1) Press the
Windows
key and the
X
key.
(2) Click
Device Manager
on the displayed menu.
The
Device Manager screen
is displayed.
(3) Double-click
Ports (COM & LPT)
.
(4) Check the port number for the port that is displayed as "IDEC Auto-ID WB1F USB CDC (COM**)".
If the port you checked in “How to check the communication port" is not displayed in the communication
port on the
Connection Settings
screen.
Close the WB9Z-CU100 Support Tool and cycle the power supply to the communication unit, then start the
WB9ZCU100 Support Tool again.
2
After you select the communication port, click
Automatic connection
.
3
Check if connection succeeded or failed.
z
Connection succeeded
Click the OK and go to step 4.
3
z
Connection failed
Click the No and repeat the procedure from step 1.
3
4
After the connection succeeds, click
Function
-
Control command
on the menu bar.
The
Control Command
screen is displayed.