IDEC WB1F Series, User Manual

Page: 52 / 116

2. Installation & wiring Function 4. Support tool 5. Appendix 1. Overview
3-29
Setup support mode
3. 3 Setup support mode
RS-232 Type USB Type
This mode is used to check the installation position and reading status of the WB1F.
Setup support mode has the following function.
z
Setup support function ........................................
F
P. 3-31
3. 3. 1 Switching operation to setup support mode (setup support function)
There are two methods to switch to setup support mode.
Use the methods according to the situation.
The indicator LEDs (red/orange/green) will all flash when you switch to setup support mode.
Method 1
You can switch to setup support mode with the Operation button.
For details, refer to
F
P. 3-30 "Detailed procedure using the Operation button" .
Method 2 You can switch to setup support mode with control commands.
For details, refer to
F
P. 5-6 "5. 5 Control commands list" .