FC6A S
ERIES
MICROS
MART
U
SER
’
S
M
ANUAL
FC9Y-B1722
9-9
9: A
NALOG
I/O M
ODULES
Analog Output Type
The following parameters are for configuring the analog outputs on the analog output modules and the mixed analog I/O modules.
Yes: Parameters,
―
: No parameters
(1) Signal Type
The signal type that can be set differs according to the analog I/O module model. Select the analog I/O module that
corresponds to the user application and set the signal type. There are five types of signal types for the analog outputs, which are
detailed as follows.
Yes: Supported, -: Not supported
No.
Parameter
FC6A-K2A1
FC6A-K4A1
FC6A-L06A1
FC6A-L03CN1
(1)
Signal Type
Yes
Yes
Yes
Yes
(2)
Data Type
Yes
Yes
Yes
Yes
(3)
Minimum and maximum values
(Data type)
Yes
Yes
Yes
Yes
(4)
Data
Yes
Yes
Yes
Yes
(5)
Status
Yes
Yes
Yes
Yes
Signal Type
FC6A-K2A1
FC6A-K4A1
FC6A-L06A1
FC6A-L03CN1
Unused
Yes
Yes
Yes
Yes
0 to 10 V
Yes
Yes
Yes
Yes
-10 to +10 V
Yes
Yes
Yes
Yes
0 to 20 mA
Yes
Yes
Yes
Yes
4 to 20 mA
Yes
Yes
Yes
Yes
*1 Channels that are set to unused are not scanned.
The circuit is setup the same as when signal type: 0 to 10 V is selected.
A channel set to unused always outputs 0 V.
(1)
(2)
(3)
(4)
(5)
The device connected to the analog I/O module may be damaged if the analog output signal type is mistakenly set and
used. Please use caution when setting the analog output signal type.
Caution
Summary of Contents for MICROSmart FC6A Series
