15
Viscount GTS -
Installation & Servicing
INSTALLATION
•
Place the first normal intermediate section, making
sure that it is turned in the right direction, i.e. with the
flattening groove against the thermocord.
•
For safety, insert a lateral assembly rod (supplied) in
the holes of the two sections.
•
Push the section gently and simultaneously onto both
nipples of the rear section with a hammer and a piece
of wood positioned in line with the bores.
•
Put the assembly tool in position.
Tighten gradually so as to bring together the upper
and lower connections evenly and simultaneously.
•
Assemble the remaining intermediate sections one by
one, to the procedure stated in Frames 13 and 14
above.
First assemble the normal intermediate sections, then
the special ones (see page 13 of this booklet).
Leave the assembly tool in place.
VIS5069
VIS5070
VIS5071
14 ASSEMBLING THE NORMAL INTERMEDIATE SECTION
VIS5072
•
Trim off any projecting ends of the
thermocords from the sweeping
covers.
INST
ALLA
TION
