IDEAL MSC-13K-B, Manual

Page: 15 / 46

15
Nov. 2021
MSC-13K
4.5 TRAVEL DISTANCE AND HEIGHT UNIT CHANGING
4.5.1 TRAVEL DISTANCE CHANGE
If the lifting height is less than 67” (170cm) due to low shop ceiling, the travel distance
shall be set in following steps before starting the lifting operation.
1. After power on, waiting the LCD screen to be the LCD screen 4th, then press
ESC
button [18] to change to system menu. ( LCD screen 5
th
)
2. When ‘USER MENU’ is high-lighted, press
ENTER
button [17] to enter the sub
menu of USER MENU. ( LCD screen 6
th
)
LCD screen 5
th
LCD screen 6
th
LCD screen 7
th
3. Press DIRECTION DOWN button [8] to move to ‘
Set of Travel
’ as in LCD screen
6
th
.
4. Press
ENTER
button [17] again to enter the travel distance modification screen.
(LCD screen 7
th
)
5. To change the travel distance, using ‘DIRECTION‘ buttons [7], [8], [9] and [10] to
move cursor to the percentage on the screen then change the number.
Note: The percentage range is 60%--100%. Min. step is 2” (5cm).
6. Press
ENTER
to confirm the modification and press
ESC
to exit this function to
upper menu. (LCD screen 8
th
)
4.5.2 HEIGHT UNIT CHANGE
1. From LCD screen 6
th
, Use ‘DIRECTION’ buttons to choose ‘
Set of Unit
’.
(LCD screen 8
th
)
2. Press
ENTER
button [17] to enter the unit modification screen. (LCD screen 9
th
)
3. To change the unit, using ‘DIRECTION’ UP and DOWN buttons [7], [8] to
change the number. ‘1’ refers to inch. ‘0’ refers to cm.
USER MENU
OPERATOR MENU
DIAGNOSTICS MENU
RELEASE PASSWORD
Parameters List
Set of Travel
Set of Unit
Special Terms
1. Use arrow key to edit:
Max. % Travel
170 X
100 >= 170 cm
2. Press ENTER then ESC