27
Harrier GTE -
Installation & Servicing
INSTALLATION
3
har7021
1
3
3
2
38 INSTALLING THE SENSORS AND ROUTING THE BURNER CABLE
1. Route the burner cable inside the
front edge return of one side of the
casing side panels opposite the
burner hinges. (RH side shown for
clarity)
2. Insert the sensors into the sensor
pocket.
3. Loop the sensor leads back over
the sensor pocket.
4. Secure the leads with the spring
clip.
har7020
3
2
4
1
37 INSTALLING THE CONTROL PANEL - FD168 Deluxe
1. Route the sensors through the left or right hand
opening in the top front panel.
2. Route the burner leads through the other
openings in the top front panel.
3. Lower the control panel onto the location buttons
farthest away from the front and slide the control
panel forwards.
ha
r70
22
6
6
5
5
4
4
4. Remove the two screws from the sides of the
control panel.
5. Tilt the control panel back.
6. Secure the control panel to the casing top front
panel with two self tapping screws and
shakeproof washers.
7. Pull the mains cable and any other sensors into
the control panel through the appropriate
opening ready to make the connections.
INST
ALLA
TION
For latest prices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - [email protected]
