26
Harrier GTE -
Installation & Servicing
INSTALLATION
1
2
3
har7017
35 INSTALLING THE MAINS AND CONTROL WIRING
1. Route the mains supply in at the
rear, along the tray of one of the
side panels and up through the
opening in the top front panel.
2. Route any remote sensor cables
similarly in the other side panel.
3. Secure the cables with the cable
ties provided.
36 INSTALLING THE CONTROL PANEL - FD167 Standard
1. Route the sensors through the left or right hand opening
in the top front panel.
2. Route the burner leads through the other opening in the
top front panel.
3. Lower the control panel onto the location buttons nearer
the front and slide the control panel forwards.
3
har7018
1
3
3
2
har7019
4
5
5
4. Remove the three screws from the rear of the
control panel and remove the top/rear cover.
5. Secure the control panel to the casing top front
panel with two self tapping screws and
shakeproof washers provided.
6. Pull the mains cable and any other sensors into
the control panel through the appropriate
opening ready to make the connections.
INST
ALLA
TION
For latest prices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - [email protected]
