- 76 -
AW 60
OPERATION
15
16
Plug the power cord into a power
outlet.
Push the POWER button.
Push FUNCTION button to select
Auto Mode
AIR FLOW:
When ambient humidity is sensed at less that
60%, the unit will operate at “High” fan speed.
When the ambient humidity is sensed at greater
than 60% the unit will operate at “Low” fan speed.
CLEANING DISCS:
When ambient humidity is sensed at greater than
75% humidity the cleaning discs will stop spinning.
When ambient humidity is sensed at less than
60%, the disc resumes to circulate.
Push the FUNCTION button to select
Continuous Mode.
Continuous Mode Indicator will illuminate.
The FUNCTION button will cycle the unit
between the following:
Auto
Continuous
Sleep
Vor dem Einschalten
Automatik Modus
Dauerbetrieb
Note
A soft buzzing or clicking sound may occur during operation;
if this is uncomfortable, you can turn off the PlasmaWave
®
feature by using the
PlasmaWave
®
ON/OFF button.
1. Branchez le cordon d’alimentation dans
une prise de courant.
2. Appuyez sur la touche MARCHE/ARRÊT.
3. L’appareil démarre en mode AUTO et la
fonction PlasmaWave
®
est activée.
Note
Un léger bourdonnement ou un cliquetis peut se faire entendre lorsque l’appareil fonctionne ;
si c’est gênant, vous pouvez désactiver la fonction PlasmaWave
®
à l’aide de la touche
PlasmaWave
®
ON/OFF.
Avant la mise en marche
Utilisation