IDEAL Networks LanXPLORER Pro, Manual

Page: 58 / 64

LanXPLORER Pro 150835 Iss 5
User Manual Page 57
Chapter 11. Specifications
Connectors
• Primary RJ45 test port on left side

Used for: Cable Test, Endpoint Test, In-Line Test

User-replaceable contacts

500 insertion cycles
• Secondary RJ45 test port on right side

Used for: In-Line Test

User-replaceable contacts

500 insertion cycles
• Optical test port on left side

Used for: Endpoint test

SFP Socket
• USB port for management at top

Used for: Result upload, Software update, Wi-Fi antenna

Class: Host

Connector Type A

1.1 USB Type
• Power port for battery charging, mains powering via adaptor on right side

12V Voltage

Connector Type 2.0 pin power jack

2 Amp Current

Centre Pin positive polarity
Controls
•
Screen: Touch Screen

Used for: Touch Control of all Tester Functions

Located on front
• On/Off: Push Button

Used for: Power On/Off

Located on front
• Function Keys: F1 to F4

Used for: Screen Defined Functions

Located on front
• Navigation Keys: Cursor, Enter & Escape

Used for: User Interface Navigation

Located on front
• Autotest

Used for: Launch of automatic test sequence

Located on front
• Reset: Push Button

Used to Escape from exceptional lockup condition

Accessible through hole inside battery compartment using stylus tip
Displays
• Charger LED: Indication of charging status

Red/Green

Located on front
• Primary RJ45 Link LED: ON indicates Primary link UP

Green

Adjacent to socket
• Primary RJ45 Activity LED: Flashing indicates Primary link activity

Green

Adjacent to socket
• Secondary RJ45 Link LED:ON indicates Secondary link UP