LanXPLORER Pro
150835 Iss 5
User Manual
Page 23
Netmap
This menu allows settings to be made for the netmap test.
1.
Select the menu point "Netmap"
.
2.
Select the area to be scanned by activating or
deactivating the option
Local Network
or
Custom Network
. The option activated is
indicated by a radio button.
3.
Select the desired option.
4.
Select the desired test parameters or enter
the desired information with the alphanumeric
keys.
5.
Save the entry made with Apply. You can exit
the menu without saving the changes with
Escape.
VoIP (Voice over IP)
This menu allows settings to be made for the quality parameter of the VoIP test. The
LanXPLORER compares each call with the set quality parameters and evaluates the call.
1.
Select the menu point "VoIP"
.
2.
Select the desired option.
3.
Enter the desired information with the alphanumeric keys.
4.
Save the entry made with Apply. You can exit the menu without saving the
changes with Escape.
Option
Description
Local Network
Scan local network - automatic setting is used.
Custom
Network
Scan specific network area
IP Address
Defines the Custom Network area to be scanned
Scan range
Scan Range
Max Number of Hosts
Test time
Normal (/24)
256
Short
Wide (/20)
4096
Medium
IPv6 Scan
Include IPv6 hosts in the scan
Custom Service
Scan for hosts running specific UDP / TCP services, eg SIP, on
specific ports
Option
Description
VOIP Port 1
Setting the communication port 1
VOIP Port 2
Setting the communication port 2
Jitter (ms)
Limit value for the measuring parameter Jitter
Delay (ms)
Limit value for the measuring parameter Delay
Lost Pkts (%)
Limit value for the measuring parameter of lost
packets
Figure 33: Netmap
Figure 34: VoIP
Summary of Contents for LanXPLORER Pro
Page 1: ...LanXPLORER Pro ...
Page 64: ......
