IDEAL INDUSTRIES Heat Elite Plus, Operating Manual

Page: 8 / 36

8
ACCESSORIES
The following adapters are recommended for the Heat Elite Plus LCD:
Reduction Adapter Glass Protection Wide Slot Adapter Small Deflector
Ø 20 mm Adapter Adapter
Cat. No. 46-950 Cat. No. 46-951 Cat. No. 46-954 Cat. No. 46-941
Welding Adapter Overlap Welding Pressure foller Solder Reflector
Adapter Adapter
Cat. No. 46-952 Cat. No. 46-955 Cat. No. 46-956 Cat. No. 46-953
• Only genuine IDEAL INDUSTRIES, INC. adapters may be fitted onto the Heat Elite Plus LCD.
• When fitting a adapter, it is strongly recommended to switch off the Heat Elite Plus LCD.
• Attention: Do not touch the adapters, they are hot! Always use pliers!
• Any hot item must be placed on a fire proved surface (example: a metallic sheet) to
avoid danger of fire.
STAND-BY mode / COOL DOWN DEVICE mode
The STAND-BY mode is used to minimize the energy consumption and reduce the noise
level. It is recommended to cool down the Heat Elite Plus LCDat the end of each working
session.
Example:
OPERATION
USA
Temperature is
being reduced
Operation Operation
410 450
STANDBY STANDBY
COOL DOWN
450
STANDBY
450
SHRINKING STAND-BY SHRINKING
Temperature is being
regulated at minimum
air volume
Press
briefly
Press
briefly
Press
briefly