Chapter 2
Test Setup Procedures
ACTIVATING THE TONE GENERATOR USING THE RH
1.
Connect the Remote Handset to the cable under test.
2.
Press TONE on the Remote Handset to enter Tone mode. The Remote Handset
two-line display shows the first line TONE. The second line shows the tone type
and placement of tone in the XY form of characters.
X Character
(Tone Type)
Y Character
(Placement of tone)
L = Low
78 = Pair 78
H = High
36 = Pair 36
W = Warble
54 = Pair 54
12 = Pair 12
Example: L78 = Low tone, Pair 78
Note: The Tone mode will remain active until ESCAPE is pressed.
3.
Select the pair on which to place the tone by pressing the TONE key to cycle
through the options.
4.
Select the tone for the selected pair by pressing <SHIFT>TONE to cycle through
the options.
2-20
www.vemco.pl
