Chapter 7
LANTEK REPORTER Software
2.
From the File menu, select Upload From Tester. The Upload dialog box displays.
3.
Click the desired Upload Test Type button.
4.
Select a job in the Select Upload Job text box.
Note: If you want to add AutoTests from a job in the cable tester to an existing
LANTEK Reporter project with the same name, you have to select the mother project
as <upload job>, that is located one level higher. (For example, for JOB 1 in the cable
tester, select <LANTEK> as the upload job)
5.
Select a Data Source. Click OK to begin the uploading process.
¾
Select Comm Port for direct connection (Serial) with the tester.
¾
Select USB/PCMCIA Compact Flash if you have stored the test results on the
compact flash card and are using the USB flash card reader.
¾
Select USB LANTEK if you have stored test results in the LANTEK Internal
Memory.
¾
Select Browse for Tests if you have Stored Tests kept on a local or network
drive.
7-13
www.vemco.pl
