Ideal Clima KERS 50, User & Installation Manual

Page: 3 / 28

KERS 50 – Heat recovery ventilation unit – User & installation manual
© Ideal Clima – Page 3 / 28
1. INTRODUCTION
This manual indicates the intended use of the unit and provides instructions for transportation, installation,
mounting, setting and use the unit. It provides information regarding maintenance, spare parts order, staff
education and residual risks.
The user and maintenance manual must be read and used as follows:
- Each operator involved in the use and maintenance of the unit must read this manual completely and
carefully and respect what it is reported;
- The employer is obliged to ensure that the operator meets the requirements for the conduct of the units
and has taken careful note of the manual; the employer must also inform the operator about the risks of
accidents and in particular about the risks from noise, on provided personal protective equipment and
on general safety rules by laws or international standards of the country of destination;
- The manual must always be available to users, managers, those responsible for transportation, installation,
use, maintenance, repair and decommissioning;
- Keep the manual protected from humidity and heat and treat it as an integral part of the unit for its entire
duration, take it to any other user or successive owner of the unit;
- Make sure that any update received is enclosed in the text;
- Do not damage, remove, tear or rewrite for any reason the manual or parts of it; if it is lost or partially
ruined and you can no longer read its content is recommended to request a replacement to the
manufacturer indicating the serial number of the machine.
Pay attention to the following symbols. Their function is to emphasize essential information like:
With reference to serious and dangerous situations that may occur with the use of the unit to ensure
persons safety.
With reference to dangerous situations that may occur with the use of the unit to prevent damage to
property and to the unit itself.
With reference to additional information or suggestions for proper use of the unit.
The manufacturer has the right to update products and manuals, without any obligation to update previous
versions, except in particular cases.
This manual reflects the technical knowledge available at the time of commercialization of the unit and cannot
be considered inadequate only because later updated according to new technologies.
To require updates or addition to the user manual, which shall be considered an integral part of the manual,
forward the request to the contact details found in this manual.
Contact the manufacturer for further information and for any proposals to improve the manual.
The manufacturer asks, in case of transfer of the unit, to indicate the address of the new owner so to facilitate
the transmission of any new additions of the manual to the new sender.
1.2 LIABILITY
The unit is guaranteed in accordance with the contractual arrangements at the moment of the sale.
The manufacturer is exonerated from any liability and obligation and will cancel the form of guarantee provided
in the contract of sale for any accident to persons or property that may occur due to:
- Non-compliance of the instructions present in this manual regarding the management, use,
maintenance and incidents extraneous to the routine and proper use of the unit