Ideal Clima KERS 50, User & Installation Manual

Page: 5 / 28

KERS 50 – Heat recovery ventilation unit – User & installation manual
© Ideal Clima – Page 5 / 28
- Make sure that safety devices are working properly and that you have doubts about how they work;
otherwise not start in any case the unit;
- Use only tools specified from the manufacturer. To avoid injury, do not use tools worn or damaged,
poor quality or improvised;
- Once made the cleaning unit, the operator must check that no parts are worn, damaged or not
firmly attached, otherwise request the intervention of the maintenance technician;
- It is forbidden to use flammable fluids for cleaning operations
To clean the unit does not use diesel, petrol or solvents as the first leave an oily film that causes dust adhesion
while solvents (even if weak) damage the paintwork. If a water jet gets inside the electrical devices in addition
to oxidize the contacts, it can cause a malfunction. For this reason never use water or steam jets on sensors,
connectors or any electrical part.
1.5 USE
KERS units are room by room heat recovery, to be installed in the wall, allowing to ventilate a room without
channeling and without loss of heat by the emission of exhaust air.
Its use is recommended within the operating limits shown in this manual.
Place the unit in rooms where there is no danger of explosion, corrosion, fire and where there are
vibrations and electromagnetic fields. It is also forbidden to operate in a different way from that
described or to neglect the illustrated safety tasks.
1.6 GENERAL SAFETY RULE
Use appropriate protective clothing
All operators must use personal protective equipment such as gloves, hard hat, eye goggles, accident
prevention shoes and ear defenders against noise.
Fire extinguisher and first aid kit
Place a first aid kit and a fire extinguisher near the unit.
Regularly make sure that extinguishers are charged and that it is clear the usage
mode.
In case of fire use in accordance with regulations and contact the fire department.
Periodically check that the first aid kit is complete.
Make sure you have nearby telephone numbers for first aid.
The fire extinguisher and first aid kit is responsibility of the owner on which you install the
unit.
Warnings for checks and maintenance
Apply a sign "MAINTENANCE WORK" on all sides of the unit.
Carefully check the unit by following the list of operations described in this manual.
Cleaning instructions