27
Mexico Super RS 3/60P - 3/100P -
Installation
SERVICING
46 IGNITION ELECTRODE REPLACEMENT - RS 3/100P ONLY
Detail of pilot flame length and spark gap
47 THERMOCOUPLE REPLACEMENT - RS 3/60P & RS 3/75P ONLY
1.
Lift off front panel and remove the grille assembly - refer to
Frames 30 & 31. Undo the gas cock union.
Remove the burner and controls assembly.
2.
Remove the ignition electrode. Refer to Frame 45.
3.
Remove the purse clip.
4.
Undo the thermocouple nut at the pilot burner and pull the
thermocouple clear.
5.
Undo the thermocouple connection at the gas valve.
6.
Remove the sealing plate and gasket (refer to Frame 44)
and withdraw the thermocouple.
7.
Fit the new thermocouple and re-assemble in reverse
order.
Note.
Avoid sharp bends in the thermocouple lead and ensure that
it follows the same route as previously.
SER
VICING
1.
Lift off front panel and remove the grille
assembly - refer to Frames 30 & 31. Undo the
gas cock union.
Remove the burner and controls assembly.
2.
Disconnect the ignition lead.
3.
Remove the electrode retaining nut and
withdraw the electrode.
4.
Fit the new electrode and re-assemble in
reverse order.
