34
Buccaneer GTE -
Installation & Servicing
INSTALLATION
58 INSTALLING THE DOMESTIC HOT WATER PROBE AND TITANIUM ANODE
1.
Remove the front panel of the hot water
calorifier.
2.
Insert the DHW sensor and titanium anode
cables into the duct of the domestic hot water
calorifier.*
3.
Connect the spade connector to the tab fitted
as standard to the tank inspection flange.
4.
Fit the eyelet connector onto the threaded part
of the titanium anode and secure with the
serrated washer and nut.
5.
Insert the domestic hot water sensor in the
attachment lug provided for it on the tank
inspection plate.*
Make the electrical connection in accordance
with the instructions for the control panel.
6.
Put the thermal insulation into place sliding it
between the cables and the plate.
7.
Attach the front panel of the hot water calorifier.
* If the DHW kit is being fitted to a remotely located
calorifier the sensor lead may be extended using
suitable cable.
59 INTER CONNECTING PIPEWORK COMPONENTS
buc555
4
1
2
3
4
8
7
10
9
8
6
5
1.
Pump
2.
Flexible connections
3.
Automatic air vent
4
. Adaptor
5.
Adaptor elbow
6.
Plugs
7.
Pump adaptor elbow
8.
Washers
9.
Caps
10.
Special flow and return adaptors
2
2
7
1
3
6
5
4
2
buc7946
COMBINA
TION BOILERS COMBINA
TION BOILERS
Summary of Contents for Buccaneer GTE 4
Page 1: ......
Page 38: ...38 Buccaneer GTE Installation Servicing NOTES ...
Page 39: ...39 Buccaneer GTE Installation Servicing NOTES ...
