background image

2

 British Gas RD1

 

Installation & Servicing

British Gas:

(Any internal reference to British Gas applies equally to Scottish Gas)

The British Gas RD1 is a range of cast iron wall mounted fanned flue gas central
heating  boilers. A complete range of natural gas models is available.

The ideal replacement boiler...

Easy to install, easy to operate and easy to service. The British Gas RD1 really is the
ultimate replacement wall mounted range - you can depend on it.

Proven reliability...

Proven cast iron heat exchanger engineered and refined to be the most dependable
wall mounted boiler ensuring totally calm operation and quiet running, whatever the
system demands.

Complete range...

There are 7 models in the range. 

All models include a Downward Routing Pipe Kit and an

overheat thermostat.

Full system suitability...

Most models are suitable for connection to pumped open vent central heating systems,
pumped central heating combined with pumped or gravity indirect domestic hot water
supply systems. (Note: the 3100 model is not suitable for gravity installations). They
can also be used on sealed water systems.

Free Three Star Service Cover:

In addition to the guarantee, we will provide absolutely free a British Gas Services
Three Star Service Cover agreement to cover your complete new system during the
first year. The benefits of this cover include priority attention and a 24 hours a day 365
day a year helpline. Full details of the terms and conditions for Three Star Cover schemes
are available separately on request.

Summary of Contents for British Gas 330 RD1









































Reviews: