46
Before the fi rst ride
The following procedures have to be performed
in addition to the tests described in the ‘’Before
the fi rst ride’’ Chapter of the technical part of your
operating instructions:
Check the important components of your
Pedelec
• Please check that the battery is secure.
• Check the charging state of your battery to en-
sure suffi cient charge for the planned ride.
• Check that all plugs and connections of the
electrical system are fi rmly attached.
• Familiarize yourself with the functions of the op-
erating panel.
Before starting out, it must be checked that all
screws, quick releases and important compo-
nents are safely and correctly fi tted. A
table with the most important screw con-
nections and the prescribed fastening
torques as well as notes concerning the
correct use of quick releases can be found at
page 10 and 37
Possible positions of quick releases/through axles
Notes on electrical and electronic compo-
nents
Your pedelec is supplied with the corresponding
operating manual for the integrated motor from
the component manufacturer.
Information concerning operation, mainte-
nance and servicing as well as technical data
can be found in these instructions and on the
websites of the respective component manufac-
The electrical system of your Pedelec
is very powerful. Correct and safe
operation requires regular maintenance be
a specialist dealer. Immediately remove the
battery when you discover damage to the
electrical system or, in particular, when live
parts are exposed after a fall or accident.
Always contact your specialist dealer for re-
pairs and when you have a question or prob-
lems or discover a defect. A lack of specialist
knowledge may lead to severe accidents and
injuries.
Switch off the electrical system and
remove the battery before carrying
out any type of work on the Pedelec.
IDEAL MANUAL 2016_eng.indd 46
6/27/16 11:39
turers.
