IDEAL Bikes TARGET Instructions For Use Manual Download

Page: 22 / 88

SAFETY

11 Maximum permitted total weight

WARNING

Risk of accident and injury!

Overloading the bicycle can cause safety-related components to break or fail,

resulting in accidents and injuries.

Never exceed the maximum permissible total weight of the bicycle.

NOTE

Risk of damage!

Overloading the bicycle can lead to material damage.

Never exceed the maximum permissible total weight of the bicycle.

The bicycle has a maximum permitted total weight that must be observed when using it.
The specification of the maximum permissible gross weight can be found in the vehicle

passport

˃ Section "Bicycle passport" on page

The maximum permitted total weight is calculated from the sum of the following weight

specifications:

B c baggage = maximum permitted total weight.

Summary of Contents for TARGET

























































































Search results

Summary of Contents for TARGET

Reviews:

Related manuals for TARGET

Brands by name

Popular brands

IDEAL Bikes TARGET, Instructions For Use Manual

Search results

Summary of Contents for TARGET

Reviews:

Related manuals for TARGET

Brands by name

Popular brands