IDEAL Bikes TARGET Page 37 Instructions For Use Manual Download

Page: 37 / 88

BRAKES

WARNING

Risk of accident and injury!

If the bicycle is fitted with unsuitable or incorrect brake pads, the braking power

may be too low or too strong, and the brake can virtually lose its function

entirely and fail completely.

Always have any brake components replaced (e.g. when carrying out repairs)

with original spare parts only.

WARNING

Risk of accident and injury!

If your bicycle is fitted with a so-called power modulator, this modulator alters

the braking power of the front brake. If the power modulator is set incorrectly or

you have never braked using the power modulator before, the risk of losing your

control and/or falling while braking will be much greater.

Familiarise yourself with the function and operation of the brake and power

modulator away from road traffic.

Summary of Contents for TARGET

























































































Search results

Summary of Contents for TARGET

Reviews:

Related manuals for TARGET

Brands by name

Popular brands

IDEAL Bikes TARGET, Instructions For Use Manual

Search results

Summary of Contents for TARGET

Reviews:

Related manuals for TARGET

Brands by name

Popular brands