IDEAL Bikes TARGET, Instructions For Use Manual

Page: 58 / 88

SADDLE
58
38.1 Adjusting the saddle height
Quick-release clamp
1
1
Quick-release clamp
Fig. 14: Adjusting the saddle height (quick-release clamp)
1. Swivel the quick-release lever outwards.
2. Adjust the saddle to the required height.
-
When doing this, observe the minimum insertion depth of the seat post.
3. Once you have adjusted the saddle to the correct height, align the saddle in a straight
line with the frame.
4. To secure the saddle in position, swivel the quick-release lever inwards until it is flush
with the seat tube.
-
If you cannot swivel the quick-release lever in as far as the seat tube, you can reduce
the initial tension by turning the adjusting screw in an anti-clockwise direction.
-
Then swivel the quick-release lever inwards again until it is flush with the seat tube
in order to close the seat post clamp.
5. Check whether the saddle can be rotated.
-
If you can rotate the saddle, increase the initial tension of the quick-release clamp by
turning the adjusting screw in a clockwise direction.