IDEAL Bikes ATB Series Original Instruction Manual Download

Page: 12 / 64

• Do not start riding before checking whether

the chain is safely resting on the chain wheel

and the sprocket. It must run fully over the gear

wheels. Falls and serious injuries may result if

you start off and the chain falls off a gear wheel.

Aluminium components may break

suddenly if they have become de-

formed. Do not use deformed or

bent components, e.g. after a fall. Always ex-

change such components.

Components made of carbon can be severely

damaged without showing any damage. Have

all components made of carbon checked by a

specialist dealer after a fall.

Do NOT ride on when you notice that something

on your bicycle has changed. Check loose parts

for functionality and always use a torque spanner

to fasten them. Bring your bicycle to a specialist

dealer, describe the fall and have the bicycle in-

spected!

Before riding your bicycle on public roads, you

should inform yourself about the applicable na-

tional regulations in your specific country.

This section provides information on how the

bicycle has to be equipped to be permitted to

participate in public road traffic.

Here you can find out which light systems have

to be installed or carried with you and which

brakes the bicycle has to be equipped with.

There is also an explanation of which age re-

strictions apply and what age riders

have to be to ride where. The partic-

ipation of children in public road traf-

fic is also addressed here. If there is

an obligation to wear a helmet, it is

started here.

Bicycles are intended for transporting

one person at a time. Taking another

person as a passenger on a bicycle

is only allowed in accordance with the rele-

vant national laws – in Germany the Road Traf-

fic Regulations. A tandem is exempt from this.

If you would like to transport baggage, this re-

quires that your bicycle is fitted with suitable

equipment. Children can only be transport-

ed in children’s seats or trailers intended for

this purpose. We recommend not taking any

chances when it comes to quality in this area!

Ensure that you do not exceed the maximum

permissible weight.

(see page C5)

Permitted overall weight: Rider’s

Bicycle Baggage

weigh

The information in these operating instructions

only applies to bicycle types that are listed on

the cover.

Information concerning individual bicycle

types is marked appropriately.

Appropriate use includes adherence to the op-

erating, maintenance and repair conditions that

are described in these operating instructions.

Legal regulations

Intended use

Info

IDEAL MANUAL 2016_eng.indd 6

6/27/16 11:39

Summary of Contents for ATB Series

































































Search results

Summary of Contents for ATB Series

Reviews:

Related manuals for ATB Series

Brands by name

Popular brands

IDEAL Bikes ATB Series, Original Instruction Manual

Search results

Summary of Contents for ATB Series

Reviews:

Related manuals for ATB Series

Brands by name

Popular brands