01
OFF
ACC
ON
START
02
03
04
OFF
ACC
ON
START
05
OFF
ACC
ON
START
06
07
08
09
10
MODULE PROGRAMMING PROCEDURE - 1 OF 1
Turn key to ON position.
Wait, if LED 1 turns solid GREEN, proceed with
step 4. If LED 1 flashes RED three times [3x],
proceed with step 3.
The vehicle’s immobilizer is NOT detected:
For USDM vehicles without an immobilizer,
press and release the module’s programming
button. Wait until LED 1 turns solid GREEN
then proceed with step 4. For CDM and USDM
vehicles with an immobilizer, verify every
wire connections and repeat the module
programming procedure.
Turn key to OFF position.
START vehicle for 15 seconds.
Press and hold the brake pedal.
Press and release the module’s programming
button.
Release the brake pedal.
Wait, LED 2 will flash GREEN.
Module Programming Procedure completed.
PAGE 8 OF 13
U.S. Patent No. 8,856,780 CA 2759622
Automotive Data Solutions Inc. © 2022
www.idatalink.com
RSA-HK5-[CMHCXA0]-EN
2017 Hyundai Elantra STD key Automatic
Doc No.: A57BBE3 - 20220121_131600
