![background image](http://html1.mh-extra.com/html/idatalink/ads-tbsl-gm/ads-tbsl-gm_install-manual_3576595004.webp)
install guide
Version française disponible en ligne au www.idatalink.com
transponder Bypass
General motors
Page 4 of 6
ADS-TBSL-GM
20071220
www.idatalink.com
For technical assistance, contact your distributor or visit www.idatalink.com/support
© 2007 ADS Inc.
NOTICE:
the manufacturer will accept no responsibility for any electrical damage resulting from improper installation of this product, be that either damage to the vehicle itself
or to the installed device. this device must be installed by a certified technician. this guide has been written for properly trained technicians; a certain level of skill &
knowledge is therefore assumed. please review the installation guide carefully before beginning any work.
www.idatalink.com
For technical assistance, contact your distributor or visit www.idatalink.com/support
© 2007 ADS Inc.
Type 2
WirinG diaGram
BLUE/RED (NC)
BLUE/YELLOW (NC)
GREEN/RED (NC)
GREEN/YELLOW (NC)
GRAY/RED - DATA OUT
GRAY/YELLOW (NC)
ORANGE (NC)
PINK/BLACK - IGNITION OUT IMMOBILIZER SIDE
PINK - IGNITION IN ECM SIDE
GRAY
ORANGE
PURPLE
BLACK
BLUE
PINK
WHITE/BLA
CK (NC)
WHITE/RED (NC) WHITE (NC)
RED - 12V
BLACK - GROUND
NO WIRE (NC)
BLUE/WHITE - GROUND-OUT WHEN RUNNING
CONNECT EITHER
IDATALINK
OR
STANDARD WIRING
IDATALINK
LEGEND
Wiring connections not required
when installed in iDataLink mode
REMOTE
STARTER
IDATALINK (RS232) PORT
REQUIRED ON REMOTE STARTER.
IF UNAVAILABLE USE STANDARD WIRING METHOD
PK3
PK3
PASSLOCK III
MODULE
Doc. No.: ##00160##