![background image](http://html1.mh-extra.com/html/idata/95uhf/95uhf_user-manual_3577651025.webp)
iData 95UHF UserManual
- 23 -
7 Precautions and Troubleshooting
7.1 Precautions for iData 95UHF
To ensure that the iData 95UHF does not fail, follow the following precautions during
use of the iData 95UHF:
Put the iData 95UHF and its components and accessories in the places where children
cannot reach.
Keep the iData 95UHF dry. Rain, moisture and liquid contain acidic materials and will
corrode the circuit board.
Do not store or use the iData 95UHF in dusty or dirty places.
Do not store the iData 95UHF in a place that is too hot. High temperature will shorten
the service life of electronic components.
Do not store the iData 95UHF in a place that is too cold. When the temperature inside
the iData 95UHF rises, moisture is generated inside the iData 95UHF, which may
damage the circuit board.
Do not try to disassemble the iData 95UHF. Otherwise, the iData 95UHF may be
damaged.
Do not touch the screen surface of the iData 95UHF by using a pen, a pencil or other
sharp articles in case the screen may be scratched.
Do not throw, beat or violently collide the iData 95UHF. Otherwise, the components of
the iData 95UHF may be damaged and the iData 95UHF may be faulty.
Do not use strong chemical products or strong detergent to clean the iData 95UHF. If
the iData 95UHF become dirty, clean the surface of the iData 95UHF by using a soft
cloth soaked with dilute glass detergent.
Please use the protective film to reduce wear as much as possible. The screen
protective film can improve the availability and durability of the screen.
Pay attention to the following during use of the battery.
The area where the iData 95UHF is charged must keep away from scraps,
inflammables or chemical substances.
When you charge the battery of a mobile device, the temperature on the battery and
charger must be in the range 0
C to 40
C.
Do not use incompatible batteries or chargers, which may cause fire, explosion, leakage
or other hazards.
Do not disassemble, press, twist, pierce or cut the battery.
Do not make the battery short-circuited or contact the connecting terminal of the battery
by using metal or other conductive objects.
Do not insert other materials into the battery, contact the battery with water or other
liquid, or expose the battery in an open fire, explosive source or other sources of
danger.
Do not put or store the battery in the environment where the temperature is too high.