1/8
5/32
5mm
3/16
7/32
1/4
wood screws
3/8
4mm screws
VESA
plate(s)
3/8
Included hardware:
• 1/8” hex key wrench
• 5/32” hex key wrench
• 5mm hex key wrench
• 3/16” hex key wrench (
deskmount only
)
• 7/32” hex key wrench
• 1/4” hex key wrench (
polemount only
)
• 3 wood screws (
wallmount only
)
• 3/8” set screw (
deskmount only
)
• 3/8” nylon lock nut (
deskmount only)
• 3/8” ID large washer (
deskmount only
)
• 4 - 4mm screws with phillips drive
• VESA plate(s)
CORD MANAGEMENT
Turn the arm assembly upside down and lay on a flat
surface. Take all the cables you wish to install and lay flat
beside the arm assembly. Using nylon wire ties or electricians
tape, make a harness out of the cabling. Make sure to form it in
such a way as to fit the cable cutout.
Remove the 4 screws on either side
of the cable channel, place your cords
in the channel and press the plastic
cover in over the cords. Replace the 4
screws.
75mm
100mm
