KEYBOARD
Install the keyboard using
the four 10/24 stainless
screws supplied in the flip-up
assembly.
Using a phillips screw driver,
attach the VESA plate to the
back of your LCD monitor.
Using the 5/32” hex key wrench,
attach the VESA plate to the
friction mount.
To mount the
monitor lower
you can also
mount the VESA upside down
with the screw holes at the top.
Adjust the tilt of your flat panel
monitor using the handles on the
right side of the friction mount.
Adjust the height of
your monitor using
the rail slider knob
as shown.
To tighten your
210 arm, first
remove the
plastic beauty
cap. Then take
7/32” hex key
wrench provided and tighten the bolt
that connects the arms
VESA
MONITOR
ADJUST TILT
ADJUST HEIGHT
You can make your
keyboard flip-up fold down
by taking out the stop pin
as shown.
KEYBOARD FLIP
