26
PRT-CTRL-SE
Protege SE Integrated System Controller
Installation Manual | June 2017
6.3
Trouble Zones
Each Controller can monitor up to 64 local trouble zones. Trouble zones are used to monitor the status of the
Controller and in most cases are not physically connected to an external zone. For example, trouble zone
CP001:03 is used to monitor the Controller's backup battery voltage and warn the Controller that the battery is
disconnected or voltage is too low. This can then be used to report a message to a monitoring station, remote
computer, keypad or siren.
The following table details the trouble zones that are configured in the Controller. The trouble type and group
define the trouble that is generated by the trouble zone when it is activated.
Zone Number
Description
Type
Group
CP001:01
Module Tamper
System Tamper
System
CP001:02
AC Failure
Power Fault
General
CP001:03
Low Battery
Power Fault
General
CP001:04
Real Time Clock Not Set
RTC/Clock Loss
General
CP001:05
Service Report Test
*
*
CP001:06
Service Report Failure to Communicate
Reporting Failure
General
CP001:07
Phone Line Fault
Phone Line Lost
General
CP001:08
Auxiliary Failure
Power Fault
General
CP001:09
Bell 1 Cut/Tamper
Bell/PGM Fault
General
CP001:10
Bell 2 Cut/Tamper
Bell/PGM Fault
General
CP001:11
Bell 1 Cut/Tamper
Bell/PGM Fault
General
CP001:12
Bell 2 Cut/Tamper
Bell/PGM Fault
General
CP001:13
Module Communication
Module Loss
System
CP001:14
Module Network Security
Module Security
System
CP001:15
Expansion Device Missing
Hardware Fault
System
CP001:16
Communication Port 1 Fault
Hardware Fault
System
CP001:17
Communication Port 2 Fault
Hardware Fault
System
CP001:18
Ethernet Hardware Fault
Hardware Fault
System
CP001:19
Ethernet Link Lost
Hardware Fault
System
CP001:20
DVAC Line Fault/Polling Error
Hardware Fault
System
CP001:21
ModBUS Communication Fault
Hardware Fault
System
CP001:22
Protege System Remote Access
Hardware Fault
System
CP001:23
Installer Logged In
Hardware Fault
System
CP001:24
Service 1 Stopped
Hardware Fault
System
CP001:25
Service 2 Stopped
Hardware Fault
System
CP001:26
Service 3 Stopped
Hardware Fault
System
CP001:27
Service 4 Stopped
Hardware Fault
System
CP001:28
Reserved
*
*
| | | |
| |
|
|
CP001:64
Reserved
*
*