MAIN SCREEN
Line 1: Displays the name of the panel, which is customizable through the web-based configuration
utility.
Line 2: blank
Line 3: Displays the system voltage. Voltage display will blink if the system voltage exceeds the
Under-Voltage or Over-Voltage Thresholds set on the
Alarm Setup
page.
Line 4: Displays the system current. Current display will blink if the system current exceeds the
Over-Current Threshold set on the
Alarm Setup
page.
NETWORK SCREEN
Line 1: Displays the network status.
Line 2: Displays the connection type.
Line 3: Displays the IP address assigned to the panel.
Line 4: Displays the MAC address of the panel.
OUTPUT SCREEN (1 – 12)
Line 1: Displays the name of the load, which is customizable through the web-based configuration
utility.
Line 2: Displays the fuse status.
OK
for good fuse and
OPEN
for blown fuse.
Line 3: Displays the output voltage. Voltage display will blink if the voltage exceeds the Under-Voltage
or Over-Voltage Thresholds set on the
Alarm Setup
page.
Line 4: Displays the output current for that individual output. Current display will blink if the output
current exceeds the Output Over-Current or Under-Current Thresholds set on the
Output Setup
page.
ALARM INPUT SCREEN (1 – 5)
Line 1: Displays the alarm input number.
Line 2: Displays the name of the alarm input if it has been entered through the web-based
configuration utility. Otherwise, this line is blank.
Line 3: blank
Line 4: Display the alarm input status.
ALARM
if the alarm input is triggered,
READY
if the alarm input
is not triggered.
Note: The alarm input screens are only displayed if the alarm input has enabled (see
Alarm Setup
section in the instruction manual).
8
