Innovative Circuit Technology Ltd.
26
Mobile Web App
The Mobile Web App (shown above) provides information on bus voltage, bus
current, input alarm status, and the status and current level of each of the bus
output channels. Tapping on an output cell will enable or disable that output. (if
logged in using an Administrator or Control account) The cell will be green when
enabled, red when disabled.
PASSWORD RESET
Reset the Administrator password, the network, and web server settings to the
original factory default values by doing the following: (the standard User password
and other settings are not affected)
1.
Press and hold either
Output Select
button on the front panel for
approximately 20 seconds until
Resetting
is shown on the LCD.
2.
Release the button
3.
Press and release one of the outputs select buttons once to view the
Network Status screen on the LCD. The factory default IP address for the
panel will be displayed.
ROUTER CONFIGURATION
Use this section to set up a Distribution Panel with remote Internet access when
located behind a router.
A router allows multiple PCs to share a single Internet connection, and must be
configured correctly to forward incoming remote data to the local IP address of the
panel.
Example configuration using a Linksys WRT54G router: (others will be similar)
1.
Log into the router and go to the port forwarding screen. In the example
Linksys WRT54G router, this is located in the Applications and Gaming
tab. The location of the port forwarding fields may be different on other
routers (consult the router manual for instructions).
2.
Configure HTTP forwarding:
a.
Enter a unique name in the
Application
field
b.
Enter the HTTP port number that the panel is using in the
Start
and
End
fields. The default HTTP port for the panel is
80
.