ICS TSS 15, Operator'S Manual

Page: 8 / 12

TITLE
TSS Vacuum OPERATOR’S MANUAL
8
© 2007 ICS, Blount Inc. F/N 71335 Oct 07
OPERATION
TSS OPERATION
• STEP 1 - The blue cloth filter bag must be used for both WET and DRY operation.
• STEP 2 - Place motor head on top of tank and secure with clamps on either side of the tank to
ensure that the head assembly seals.
• STEP 3 - Attach the swivel adaptor (white) to the end of the hose intake on the front of the TSS-
15/55
• STEP 4 - Check the drain plug on the bottom of the TSS-15/55 to make sure it is secure. If
drain plug is loose, turn clockwise to tighten.
• STEP 5 - The TSS-15/55 vacuums are equipped with overflow protection. When the tank is
full, the float will shut off airflow, and the suction will stop making to motor run at a much higher
RPM. When this happens immediately turn off the motor and empty the tank.
• STEP 6 - Always turn off the motor and unplug prior to empptying the tank. To empty, remove
the drain plug or motor head cover.
On/Off Switch ()
Swivel Adaptor (3)
Drain Plug ()
Motor Head (2)