ICS SB586TCP/166, Product Manual

Page: 16 / 128

CONFIGURATION JUMPERS
The setup of the configuration jumpers on the processor is described
below. * indicates the default value of each jumper.
NOTE: For two-position jumpers (3-post), "RIGHT" is toward the
bracket end of the board; "LEFT" is toward the memory sockets.
Jumper Description
JU80 CRT Type Select
Install on the TOP for a color CRT. *
Install on the BOTTOM for a monochrome CRT.
JU81 Password Clear
Install for one power-up cycle to reset the password to
the default (null password).
Remove for normal operation. *
JU82 Watchdog Timer
Install on the LEFT for normal reset operation. *
Install on the RIGHT to enable watchdog timer
operation.
JU83 CMOS Clear
Install to clear.
Remove to operate. *
JU84 P5A Speaker Connect
Install to connect speaker data signal to pin 8 of the
Combo IO connector (P5A). *
Remove to disconnect.
SPECIFICATIONS
1-8 TECHNICAL REFERENCE