![background image](http://html1.mh-extra.com/html/ics/sb586tcp-166/sb586tcp-166_product-manual_4477896103.webp)
OnBoard IDE
The on-board IDE (Integrated Drive Electronics) controller may be
enabled or disabled using this option.
The Setup screen displays the system option:
OnBoard IDE
: Enb-PRI
Available options are:
Disabled
Enb-PRI (Enable Primary)
Enb-SEC (Enable Secondary)
Serial Port 1
The address of Serial Port 1, the first on-board serial port, may be set
using this option. The interrupts used by Serial Port 1 and Serial
Port 2 may be assigned by jumper settings on some processor boards.
For those boards on which the selectable interrupt jumpers are not
available, IRQ4 is used for Serial Port 1 (COM1).
The Setup screen displays the system option:
Serial Port1
: 3F8H
Available options are:
Disabled
3F8H
2F8H
3E8H
2E8H
Serial Port 2
The address of Serial Port 2, the second on-board serial port, may be
set using this option. The interrupts used by Serial Port 1 and Serial
Port 2 may be assigned by jumper settings on some processor boards.
PERIPHERAL SETUP
TECHNICAL REFERENCE
7-5
Summary of Contents for SB586TCP/166
