![background image](http://html2.mh-extra.com/html/ics/660gc/660gc_operators-manual_3534845005.webp)
© 2012 ICS, Blount International Inc. Specifications are subject to change without notice. REV020212 F/N 549305
660GC OPERATOR’S MANUAL
5
SAFETY
WARNING
THE FOLLOWING SYMBOL APPLIES TO ALL THE ITEMS LISTED ON THIS PAGE
A potentially hazardous situation exists which, if not avoided,
could result in death or serious injury.
Diamond chain breakage can result in high-speed ejection of parts, which can result in death
or serious personal injury to operators or bystanders. The items listed below are critical to
minimizing the risk of diamond chain breakage and injury.
• DO NOT operate the concrete chain saw with a damaged, modified, broken, or missing
side cover, bottom guard, or guard flap. The side cover, bottom guard, and guard flap
provide protection against contact with moving parts, ejected debris, broken diamond
chain, thrown water and concrete slurry.
• DO NOT operate the saw with loose, missing, damaged or improperly repaired parts.
• DO NOT insert the saw into a slot narrower than the diamond chain segments. Rapid
pushback might occur. Reference: Most diamond segments are .225 in (5.72 mm) wide.
• DO NOT use damaged, modified or improperly repaired diamond chain.
• DO NOT run the saw upside-down. Concrete debris can fly back into the operator’s face.
• DO NOT cut ductile iron pipe with the saw. Segment loss or diamond chain breakage may
occur.
Summary of Contents for 660GC
Page 2: ......