ICS Schneider Messtechnik HYDROTECHNIK MultiHandy 2025, Operating Instructions Manual, Page: 7 / 24

EN
3 Start-up
5
2.7 Keys, icons and functions 3 START-UP
3.1 Charging measuring instrument
The batteries of the measuring instrument must be
charged before it is switched on for the first time.
How to charge the measuring instrument
1 Remove the battery protective strips from the bat-
tery compartment.
2 Connect the country adapter for the respective
country to the USB power supply.
3 Connect the USB cable to the power supply.
4 Plug the power supply into a socket.
5 Connect the USB cable to the measuring instru-
ment.
6 Let the measuring instrument battery charge unin-
terrupted for 12 hours.
7 Remove the USB cable from the measuring in-
strument.
8 Remove the power supply from the socket.
You can charge the measuring instrument with
any USB connection (e.g. on a notebook).
The measuring instrument is ready for use during
the charging process.
Switches instrument on.
Opens main menu.
Selects marked entry.
Switches display illumination on/off.
Switches instrument off (press for
2 seconds).
Changes view:
- Current measurement values
- Min./max. Measurement values
Sets zero point for all displayed chan-
nels.
Deletes all current min./max. measure-
ment values.
Starts the recording of a measurement
series.
Stops the recording of a measurement
series.
Displays the memory status during re-
cording of measurements.
Scrolls down.
Scrolls up.
Selects the next entry.
Confirms the entry.
Interrupts the current process.
Exits the menu.
Interrupts the current process.
Opens the menu for deleting measure-
ment series.
Switches the view of the selected meas-
urement or special channel on or off.
Displays USB status:
•
Instrument connected with USB.
•
Instrument is communicating via USB.
Displays battery status:
Full, half-full, empty.