ICS Schneider Messtechnik HYDROTECHNIK MultiHandy 2025, Operating Instructions Manual, Page: 17 / 24

EN
7 Channels
15
How to configure a channel
1 Press
[MENU]
to open the
MAIN MENU
.
2 Use the
[MENU]
to open the
CHANNELS
menu.
3 Use
[F1]
to select the desired channel.
Use the
[MENU]
to open the
CHANNELS
menu.
4 Configure the measurement variables:
•
Press
[MENU]
.
• Press
[F1]
or
[F2]
to change the measure-
ment variable and unit of measurement.
• Use
[MENU]
to save your entry.
5 Configure the signal type:
•
Press
[F1]
to select
Signal
.
• Press
[MENU]
.
• Press
[F1]
or
[F2]
to change the signal.
• Use
[MENU]
to save your entry.
6 Configure the measurement range or K value:
•
Press
[F1]
to select
Range
.
• Press
[MENU]
.
• Press
[F1]
or
[F2]
to change the first digit.
• Press
[F3]
to select the next digit.
• Repeat the last two steps until you have en-
tered the lower measurement area or the K
value.
• Use
[MENU]
to save your entry.
7 When you configure the measurement area, you
can enter the upper measurement range.
To do so, repeat Step
6
.
8 Press
[F4]
until the display shows the measure-
ment values again.