80
Note:
You need to have proper rights to implement the following operations. Please make sure the
HDD has been properly installed.
4.7.4.1 Manual record menu
Right click mouse or in the main menu, Advanced->Manual Record.
Manual record menu is shown as in Figure 4-89.
4.7.4.2 Basic operation
There are three statuses: schedule/manual/stop. Please highlight icon
“ ○ ”
to select
corresponding channel.
z
Manual: The highest priority. After manual setup, all selected channels will begin ordinary
recording.
z
Schedule: Channel records as you have set in recording setup (Main
Menu->Setting->Schedule)
z
Stop: All channels stop recording.
Figure 4-89
4.7.4.3 Enable/disable record
Please check current channel status: “
○
” means it is not in recording status, “
●
” means it is in
recording status.
You can use mouse or direction key to highlight channel number. See Figure 4-90.
Figure 4-90
4.7.4.4 Enable all channel recording
Highlight
○
below All, you can enable all channel recording.
Summary of Contents for NVR4i Series
