21
5
CORNER MOUNT BRACKET INSTALLATION
5.1
Component Installation
Corner mount bracket and its components are shown as below. See Figure 5-1.
Figure 5-1
5.2
Installation
5.2.1 Installation Requirements
The corner mount speed dome can be installed in the hard construction wall in the indoor or
outdoor environments where there is a 90 degrees angle. Before the installation, please make
sure:
z
The wall is thick enough to install the expansion bolt.
z
The wall can at least sustain the 4x weight of the speed dome.
5.2.2 Installation Steps
Please draw four holes position in the wall according to the holes of the corner installation
accessories. See Figure 5-2.
Figure 5-2
Then you can dig four holes and insert the M8 expansion bolts. Pull the power cable,
video/control cable and the alarm cable through the centre hole of the bottom of the corner
bracket, the waterproof adhesive, and the centre of the bracket. Please reserve the enough cable
connection length and then use the M8 expansion bolt to secure the corer mount bracket chassis
on the wall. See Figure 5-3.
Installation hole
