MAINTENANCE MANUAL
SAVANNAH S
Doc. No.:
MM-SVNH-EN
Revision:
07
Rev. Date:
07/11/2022
Proj. Ref.:
SVNH S
A/C:
Savannah S
Applies to Generic Serial Number:
yy-mm-54-xxxx
Page:
52/132
DOC
FMM00
Structure /
System
N°
Inspection item
Action / Description
Exhaust
system
22.01
Collectors
Verify rigidity, fixing plate and nut, welds,
springs and hooks of connection to
muffler, clearance with any other part.
Verify no sign of gases
22.02
Muffler
Verify rigidity, clearance with any other
part, welds, heating chamber. Verify
integrity of cylinder body, sides collectors
connection, cabin heating chamber and
terminal rigidity
Cabin
heating
23.01
Hot air pipes
Verify fixing and correct clamping of the
SCAT pipes of Airbox, muffler to valve
and cabin
23.02
Cabin heating valve
Check cabin heating knob and bowden
supported and operating correctly the
valve (pull to open). If needed, clean and
lubricate all the rotating points and wire
Electrical
system
24.01
Battery
Verify battery support and absence of
corrosive fluids or structure corrosion.
Verify wires terminals on poles are fixed
24.02
Circuit breakers
Verify wiring terminals all connected to
the breaker below the instrument panel
24.03
Wirings
Verify wirings all suspended behind the
panel, no connectors free or uncovered,
no wires worn, no oxidation. Verify mass
connected to the structure
24.04
Fittings
Verify firewall fittings rigid and sealed
24.05
Battery general fuse
Verify battery fuse integrity, case and
cables without sign of heating or
damages and properly suspended
24.06
Rectifier unit
Verify fixed to the firewall, connector and
wirings without any sign of heating or
damages
24.07
Starter relay
Verify starter relay rigidly supported.
Verify wiring on poles fixed and protected
24.08
Engine electric starter
Verify connectors fixed, wirings insulated
and supported to the engine mount
without any damages
24.09
Engine mass
Verify engine mass connected to the
aircraft structure mass and all parts are
properly fixed
Table 19o