MAINTENANCE MANUAL
SAVANNAH S
Doc. No.:
MM-SVNH-EN
Revision:
07
Rev. Date:
07/11/2022
Proj. Ref.:
SVNH S
A/C:
Savannah S
Applies to Generic Serial Number:
yy-mm-54-xxxx
Page:
41/132
DOC
FMM00
Structure /
System
N°
Inspection item
Action / Description
Right Wing
02.04
Attachments to struts
Verify front and rear spar attachment
plates integrity, bolt and nut closed (mark
alignment)
02.05
Struts
Verify front and rear strut shape and
straight. Verify upper and lower fork
integrity, bolt and nut closed (mark
alignment)
02.06
Jury strut
Verify jury strut integrity and shape, rigid
connection to spar
02.07
Vortex
All present
02.08
Tip
Verify tip corners integrity and light
support is fixed rigidly.
Check light function (if installed)
Right
Flaperon
03.01
Structure
Verify skin shape integrity and rivets all
present. Verify connection plates and bolt
with stop nut closed between the inboard
and outboard flaperon
03.02
Hinges
Verify hinge points with castle nut and
cotter pin properly fixed and free play
within tolerances.
Clean and lubricate if necessary
03.03
Control system horn
Verify control horn bolts and stop nuts
closed. Verify rotation is free with
clearance with the fuselage structure
03.04
Surface travel
Verify flaperon free in its entire travel.
Check surface deflection angles if any
part of the control system has been
modified or dismounted (included flap
lever or actuator); check also surface
deflation angles in case of flap function
operation, with coherency of the flap
indicator for the entire travel.
Verify flaperon angular free play within
tolerance (with control fixed)
03.05
Tip cover
Verify rigidly supported
Table 19c