ROCKY-3705EV-R2 Socket 370 Celeron
TM
, Pentium III
®
& Tualatin Processor with Ethernet , VGA , Audio Board
55
Ring / PCIPME Power Up Control
When you select
Enabled,
a signal from ring / PCIPME returns the system to Full
On state.
The choice: Enabled, Disabled.
KB Power On Password
This item can be used to prompt the used for a password when the system power
is resumed by keyboard action .
The choice: Disable , Enable.
Power Up by Alarm
When you select
Enabled,
the following fields appear. They let you set the alarm
that returns the system to Full On state.
Date ( of Month ) Alarm lets you select a day from 1 to 31 . Time Alarm lets you
select a time for the alarm in hours , minutes , and seconds .
The choice: Enabled, Disabled.
ROCKY-3705EV-R2 Socket 370 Celeron
TM
, Pentium III
®
& Tualatin Processor with Ethernet , VGA , Audio Board
56
4.11 PnP/PCI Configuration Setup
This section describes configuring the PCI bus system. PCI, or
P
ersonal
C
omputer
I
nterconnect, is a system which allows I/O devices to operate
at speeds nearing the speed the CPU itself uses when communicating
with its own special components. This section covers some very
technical items and it is strongly recommended that only experienced
users should make any changes to the default settings.
CMOS Setup Utility – Copyright © 1984-1998 Award Software
PnP/PCI Configurations
Reset Configuration Data Disabled
Resources Controlled By Auto(ESCD)
IRQ Resources Press Enter
PCI/VGA Palette Snoop Disabled
Item Help
-------------------------
Menu Level
Default is Disabled.
Select Enabled to reset
Extended System
Configuration
Data(ESCD) when you
exit Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
↑↓←→
Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit
F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized
Defaults
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset
Extended System Configuration Data (ESCD) when you exit Setup if you
have installed a new add-on and the system reconfiguration has caused
such a serious conflict that the operating system can not boot.
The choice: Enabled, Disabled .
