ROCKY-3705EV-R2 Socket 370 Celeron
TM
, Pentium III
®
& Tualatin Processor with Ethernet , VGA , Audio Board
41
Report No FDD For Win 95
Whether report no FDD for Win 95 or not.
The choice: Yes, No.
Video BIOS Shadow
This item allows the video BIOS to be copied to system memory for
faster performance.
The Choice : Enable , Disable.
4.8 Advanced Chipset Features
CMOS Setup Utility – Copyright © 1984 – 1998 Award Software
Advanced Chipset Features
Advanced DRAM Control 1 Press Enter
Advanced DRAM Control 2 Press Enter
System BIOS Cacheable Disabled
Video BIOS Cacheable Disabled
Memory Hole At 15M-16M Enabled
AGP Aperture Size 64MB
Graphic Window WR Combin Enable
Concurrent function ( MEM ) Enabled
Concurrent function ( PCI ) Enabled
CPU Pipeline Control Enabled
PCI Delay Transaction Enabled
Power-supply Type AT
Memory Parity Check Enabled
Item Help
______________________
_____________
Menu Level
↑↓←→
Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit
F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized
Defaults
ROCKY-3705EV-R2 Socket 370 Celeron
TM
, Pentium III
®
& Tualatin Processor with Ethernet , VGA , Audio Board
42
This section allows you to configure the system based on the specific
features of the installed chipset. This chipset manages bus speeds and
access to system memory resources, such as DRAM and the external
cache. It also coordinates communications between the conventional
ISA bus and the PCI bus. It must be stated that these items should
never need to be altered. The default settings have been chosen
because they provide the best operating conditions for your system.
Advanced DRAM Control 1 / 2 Settings
The first chipset settings deal with CPU access to dynamic random
access memory (DRAM). The default timings have been carefully
chosen and should only be altered if data is being lost. Such a scenario
might well occur if your system had mixed speed DRAM chips installed
so that greater delays may be required to preserve the integrity of the
data held in the slower memory chips.
Auto Configuration
This item will automatically configure the chipset timing. . You may select
'manual' to set up following gray items by your specific need.
The choice: Manual, Auto, 100MHZ, 133MHZ.
SDRAM RAS Active Time
This item defines SDRAM ACT to PRE command period.
The Choice: 6T, 7T, 5T, 4T.
SDRAM RAS Precharge Time
This item defines SDRAM PRE to ACT command period.
The Choice: 3T, 2T, 4T, Reserved.
RAS to CAS Delay
This item defines SDRAM ACT to Read/Write command period.
The choice: 3T, 2T, 4T, Reserved.
