manualshive.com logo in svg

ICP Electronics NOVA-7895, User Manual

Share
Download
ICP Electronics NOVA-7895 User Manual Download Page 27

 

NOVA-7895 Socket 370 Celeron

 TM

 & Pentium III 

®

                          

Multimedia & Dual Ethernet ,IEEE1394,  Embedded Board 

51

System BIOS Cacheable 

Selecting 

Enabled

 allows caching of the system BIOS ROM at F0000h-FFFFFh, 

resulting in better system performance.  However, if any program writes to this 
memory area, a system error may result.  

The choice: Enabled, Disabled. 

Video RAM Cacheable 

Select Enabled allows caching of the video RAM , resulting in better system 
performance.  However, if any program writes to this memory area, a system 
error may result. 

The choice: Enabled, Disabled. 

AGP Aperture Size 

Select the size of the Accelerated Graphics Port (AGP) aperture. The aperture is 
a portion of the PCI memory address range dedicated to graphics memory 
address space.  Host cycles that hit the aperture range are forwarded to the AGP 
without any translation.   

The Choice: 4M, 8M, 16M, 32M, 64M, 128M, 256M. 

Graphic Window WR Combin 

Use this item to enable or disable CPU support for WR Combin. 

The Choice : Enable , Disable . 

Concurrent Function ( MEM ) 

This item is CPU & PCI Masters Concurrently Access Memory Function.  Select 
enabled allows CPU access memory cycles and PCI masters access memory 
cycles concurrently issued onto host bus and PCI bus, respectively, and then the 
memory access cycles will be rearranged by SiS630 to memory sequentially. 

The choice: Enabled, Disabled 

Concurrent Function ( PCI ) 

NOVA-7895 Socket 370 Celeron

 TM

 & Pentium III 

®

                          

Multimedia & Dual Ethernet ,IEEE1394,  Embedded Board 

52

This item is CPU & PCI Masters Concurrently Access PCI Bus Function.  Select 
enabled allows CPU access PCI bus cycle and PCI masters access memory 
cycles concurrently issued onto host bus and PCI bus, respectively. 

The choice:  Enabled, Disabled. 

CPU Pipeline Control 

When enabled this item, only one pending cycle is allowed at one time. 
When disabled, there might be more than two pending cycles at one time 
depends on the CPU behaviour. 
The choice:  Enabled, Disabled.

 

PCI Delay Transaction 

If the chipset has an embedded 32-bit write buffer to support delay 
transaction cycles, you can enable this item to provide compliance with 
PCI Ver.2.1 specifications. However, we recommend that you leave this 
item at the default value. 
The choice : Enable, Disable. 

Power-Supply Type 

This item controls the power-supply type  to AT or ATX. 
The choice: AT,ATX. 

Memory Parity Check 

Enabled this item to test the boot-up memory. . 

The choice:  Enabled, Disabled. 
 

Summary of Contents for NOVA-7895

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands