ROCKY-3701 Socket 370 Celeron
TM
& Pentium III
31
This option sets a password that is used to protect your system
and Setup Utility. Supervisor Password has higher priority than
User Password. Once you setup the password, the system will
always ask you to key-in password every time you enter the
BIOS SETUP. If you enter the BIOS SETUP with Supervisor
Password, you can access every setup option on the main
menu but with User Password you can only choose three setup
options (USER PASSWORD, SAVE SETTING AND EXIT and
EXIT WITHOUT SAVING). To disable these passwords, enter
the BIOS SETUP menu with Supervisor Password and then just
press the <Enter> key instead of entering a new password when
the 'Enter Password' prompt pop-up.
Auto-Detect Hard Disk
This option detects the parameters of an IDE hard disk drive
(HDD sector, cylinder, head, etc) automatically and will put the
parameters into the Standard CMOS Setup screen. Up to 4 IDE
drives can be detected and the parameters will be listed in the
box. Press <Y> if you accept these parameters. Press <N> to
skip the next IDE drives.
ROCKY-3701 Socket 370 Celeron
TM
& Pentium III
32
Note: If your IDE HDD was formatted in previous older system, incorrect
parameters may be detected. In this case, you need to enter the correct
parameters manually or low-level format the disk.
Auto Configuration with Optimal Settings
This option lets you load the
Optimal
default settings. These
settings are
best-case values
which will provide the best
performance. Whenever your CMOS RAM is damaged, this
Optimal settings will be loaded automatically.
Auto Configuration with Fail Save Settings
This option lets you load the
Fail Safe
default settings when
something happens to your computer so that it cannot boot
normally. These settings are not the most optimal settings but
are the most stable settings.
